This guide is part of the XingLiao sourcing series for buyers specifying smart switches, video doorbells and security cameras with a Shenzhen OEM. In short, CE Mark Declaration Not is the deciding factor for most buyers.
The short answer
A CE mark is primarily a manufacturer’s declaration that the product meets the applicable European directives. For most smart home devices it is self-declared — nobody in a laboratory signs it off on your behalf. The document that actually proves anything is the test report behind it, and that is what you should be asking for.
Who this page is for
Buyers comparing suppliers who all claim “CE certified,” and importers who need to know what paperwork to hold on file in case a market surveillance authority asks.
What you are actually looking at
| Document | Who issues it | What it proves |
|---|---|---|
| Declaration of Conformity | The manufacturer | They assert compliance and accept legal responsibility |
| Test report | A testing laboratory | The product was measured against specific standards |
| Technical file | The manufacturer | Design, risk assessment and evidence behind the declaration |
| Certificate (where a scheme requires one) | A notified body | Third-party involvement, mandatory only for some categories |
The critical insight: a supplier that shows you a picture of a CE logo has shown you nothing. Ask for the test reports referenced in the declaration, and check the standard numbers against the directives that apply to your product.
Four due-diligence steps worth taking
1. Ask which directives are declared
For this product class that typically means a combination covering radio equipment, electrical safety and electromagnetic compatibility, plus substance restrictions. If the declaration does not name the directives, it is not a serious document.
2. Match the test report to your actual configuration
A report for one module variant does not cover a different one. Wireless modules especially: changing the radio changes the assessment. Confirm the report covers the specific build you are buying.
3. Keep the documentation on file
The importer bears responsibility once the product enters the market. Hold the declaration, the test reports and the technical file reference yourself, not solely with the factory.
4. Check the market-specific additions
The UK requires UKCA rather than CE. CCC applies for the Chinese domestic market. PSE applies in Japan. Each is a separate assessment, and none is implied by CE.
What our own scope actually covers
Certification support covers CE, FCC, RoHS, UKCA, CCC and PSE. That means we build to those requirements and support the assessment process — it does not mean every existing product holds every one of those marks today.
Where we do not hold a specific current approval for your target market, we will say so rather than imply coverage. That distinction is worth money to you if a regulator ever asks, and it is worth asking about explicitly.
Standard platform orders start at MOQ 500 pieces per colour, with sampling in 7-15 days and tooling in 25-40 days where new steel is required. Warranty is 12 months with lifetime technical support, and programmes run under NDA by default.
This is general guidance, not a compliance certification. Confirm current certification status per product and per market before importing.
Frequently Asked Questions
Is CE a quality mark?
No. It is a legal declaration of conformity. It says nothing about build quality, expected life or performance beyond the standards cited.
Who signs the Declaration of Conformity?
The manufacturer, or their authorised representative established in the EU. For imported goods this distinction matters a great deal.
Do I need a notified body?
For most products in this category, no — self-declaration is permitted. Some categories require third-party involvement, which is why you should check the directives rather than assume.
Does CE cover the UK market?
No. The UK requires UKCA. Both may be supported on one product, but each is a separate assessment.
Is RoHS the same as CE?
No. RoHS restricts hazardous substances and is one of several requirements typically declared under the CE umbrella. It is a distinct piece of evidence.
If a product already has FCC, does it meet European requirements?
Not automatically. FCC is a US requirement. It is useful evidence about the radio module’s behaviour but it is not a substitute for the European assessment.
What should I request from a supplier before importing?
The declaration naming its directives, the test reports it references, confirmation those reports cover your exact configuration, and the technical file.
Can certification be added after production?
Rarely cleanly. Radio and safety characteristics are designed in. Retrofitting usually means changing modules or the enclosure, which is far more expensive than specifying at the start.
Need current certification status for a specific market? Ask directly at xingliaotech.com/contact, or review manufacturing and ODM capability at xingliaotech.com. That is why CE Mark Declaration Not keeps gaining attention in this category.
Related Articles
- NDAA Compliance and Data Privacy: What Camera Buyers Must Check
- Smart Home OEM Certifications Explained: CE, FCC, RoHS and UKCA
- Glass Touch Switch Sourcing Checklist
- Incoterms 2026: EXW vs FOB vs CIF vs DDP for Smart Home Hardware Buyers
XingLiao Smart Home — OEM/ODM Sourcing Guides
- How to Choose a Smart Switch Manufacturer in China
- Smart Switch Board Manufacturer (OEM/ODM)
- Tuya Smart Switch OEM
- Video Intercom Manufacturer
- China Factory vs Trading Company — How to Tell
Need a quote? Talk to our Shenzhen factory →
Planning an ODM project?
Tell us the product, target market and volume. We reply with a quotation, sample list and production schedule, usually within one working day.