This page is part of our smart home OEM sourcing notes — the things buyers ask us before they commit to a platform. If you are comparing ecosystems for a private-label order, start here.
The short answer
Tuya Smart and Smart Life are the same platform. Both apps are consumer front-ends on Tuya’s cloud, so asking a factory for “Smart Life, not Tuya Smart” does not change the hardware, the firmware, or the cost. eWeLink is a genuinely different platform — it belongs to Sonoff / ITEAD. That means you are really choosing between two ecosystems, not three: Tuya (with Smart Life or Tuya Smart as the app skin) or eWeLink. The choice locks in your radio module, your wireless certification scope, and whether you can ship an app under your own brand. Changing it later means a new module and a re-certification, not a firmware tweak.
Who this page is for
Distributors, brand owners and project buyers specifying a smart switch, plug, sensor or doorbell line for OEM or ODM production. If you are choosing which app your end user will install, or you have been asked to “confirm the app” in a quote request, this is the decision that drives everything downstream.
What each name actually is
| Name | Owner | What it really is | Typical use |
|---|---|---|---|
| Tuya Smart | Tuya Inc. | Consumer app front-end on Tuya cloud | Global retail, DIY smart home |
| Smart Life | Tuya Inc. | Second consumer app on the same Tuya cloud | Same as above; often used for different regional store listings |
| eWeLink | Sonoff / ITEAD | Independent cloud and app for Sonoff-class devices | Buyers already invested in the Sonoff ecosystem |
The practical consequence: a device that works in Smart Life works in Tuya Smart, and vice versa. They are two doors into the same building. eWeLink is a different building.
Four things the choice actually changes
1. The radio module, and therefore your certification
The ecosystem is not a software layer you can swap later. Tuya-class devices carry a Tuya Wi-Fi or Tuya ZigBee module; eWeLink-class devices carry a different module with different firmware. Because the radio is what gets tested, switching platforms after you have certified means re-running the wireless portions of CE, FCC, RoHS, UKCA, CCC and PSE work. That is a real cost and a real delay, and it is the single most common cause of “we thought we could just change the app.”
2. Whether the app can carry your brand
If your plan is to sell under your own name, you need to know whether the platform lets you ship an app that looks like yours. Tuya has an established OEM app path for brand owners. eWeLink is built primarily around its own app and its own account system, so a white-label app is not the default shape of that relationship. Ask this question explicitly before you commit, and get the answer in writing — it is the difference between a product line you own and a product line you rent.
3. Cloud dependency and what happens if you outgrow it
Every one of these platforms is a cloud dependency. Your devices stop being fully functional if the cloud is unreachable, and your end users’ accounts live on someone else’s servers. Tuya publishes APIs that let a brand connect devices to its own backend, which is why it is the common choice for buyers who may later want their own cloud. eWeLink is more self-contained. Neither is wrong; they suit different exit plans. If you expect to build your own platform in two or three years, say so at the RFQ stage, because it changes which module and which firmware baseline you should specify.
4. What your existing channel already sells
This is the least technical and most commercially decisive factor. If your warehouse already stocks Sonoff-class devices and your installers already use eWeLink, forcing a Tuya-based line into that channel creates two apps in one home and a support burden you will pay for. Ecosystem continuity with what you already sell usually beats any platform feature comparison. Conversely, if you are starting from zero, the larger device catalogue and OEM app tooling on the Tuya side is usually the safer first move.
What the order actually looks like
On our side the platform choice does not change the manufacturing shape of the programme. Standard models start at 500 pcs per colour. Fully custom tooling — a new housing, a new glass finish, a new button layout — typically runs 2,000–3,000 pcs. Sampling takes 7 to 15 days; new tooling takes 25 to 40 days after approval. Certification support covers CE, FCC, RoHS, UKCA, CCC and PSE.
We build on 172 existing mass-production platforms across 16 categories, so in most cases the question is not whether we can make the product — it is which module goes on the board. We have shipped Tuya Wi-Fi and Tuya ZigBee units since 2014, which matters for one specific reason: the module is integrated at board level, so a finished unit pairs on first power-up instead of failing in the field at the QR-code step.
When eWeLink is the right answer
We would rather say this plainly than steer every buyer to one platform. Choose eWeLink if your existing installed base already runs on it, if your channel partner’s catalogue is built around Sonoff-class devices, or if your after-sales team is already trained on that app. In those cases ecosystem continuity is worth more than any platform-level advantage. We will also tell you when a requirement is outside what we do well — we keep some lines deliberately narrow rather than quoting everything.
Put these four lines in your RFQ
- Platform: name the ecosystem (Tuya / eWeLink) and the protocol (Wi-Fi or ZigBee). “Smart home app” is not a specification.
- App: state whether you need the stock app, a white-label app under your brand, or API access to your own cloud.
- Market: name the destination countries so the certification scope is quoted correctly, not assumed.
- Volume: give the first-order quantity and the expected annual repeat. Whether you land on 500 or 3,000 pcs changes which tooling path is offered.
Every programme starts under NDA, and we will quote within one working day. If you are still deciding, send the RFQ with the platform marked as “open” and we will price both paths so you can compare with real numbers instead of assumptions.
Related reading
- Tuya smart switch OEM — module-level integration and white-label options
- Smart switch board manufacturer — gang counts, box sizes and protocols
- Smart plug manufacturer — 10 A and 16 A versions, with or without metering
- Smart home automation system manufacturer — building a whole range
Frequently Asked Questions
Are Tuya Smart and Smart Life different platforms?
No. Both are consumer apps on the same Tuya cloud and the same device firmware. A device that pairs in one works in the other. Specifying one over the other does not change the hardware, the cost, or the certification.
Is eWeLink the same as Tuya?
No. eWeLink is Sonoff / ITEAD’s own cloud and app. It uses a different module and a different firmware baseline, so it is a separate platform decision rather than a different app for the same platform.
Can I switch platforms after the first production run?
Technically yes, practically it is a new project. The radio module changes, which means re-running the wireless parts of your certification and re-quoting the board. Treat the ecosystem as a fixed decision at RFQ stage.
Can I put my own brand on the app?
On the Tuya side, yes — there is an established OEM app path for brand owners, and API access if you want your own backend later. On the eWeLink side the app is primarily the platform owner’s own. Confirm this in writing before you commit.
Does the platform choice change the MOQ?
No. Standard models start at 500 pcs per colour and fully custom tooling at 2,000–3,000 pcs regardless of which ecosystem you specify.
Does it change the lead time?
Not for standard models — sampling is 7 to 15 days and new tooling 25 to 40 days. Platform choice only affects timing if it forces a board redesign after certification has already started.
Which certifications can you support?
CE, FCC, RoHS, UKCA, CCC and PSE. Note that we do not hold UL or ETL files; if your North American channel requires those, raise it at the start because it is handled case by case.
What if I am genuinely undecided?
Send the RFQ with the platform marked “open” and state your target markets and volumes. We will price both paths so the comparison is made on real numbers.
Talk to the factory — send your RFQ and we quote within one working day.
📌 This article is part of our Complete Smart Hub — more guides and buying tips inside.
XingLiao Smart Home — OEM/ODM Sourcing Guides
- How to Choose a Smart Switch Manufacturer in China
- Smart Switch Board Manufacturer (OEM/ODM)
- Tuya Smart Switch OEM
- Video Intercom Manufacturer
- China Factory vs Trading Company — How to Tell
Need a quote? Talk to our Shenzhen factory →
Planning an ODM project?
Tell us the product, target market and volume. We reply with a quotation, sample list and production schedule, usually within one working day.